The Seattle Fire Department recently responded to three residences where a person called 9-1-1 after their CO alarm beeped intermittently. Upon further investigation it was discovered that there was no emergency but that the CO alarms in question were sounding every 30 seconds to indicate expiration.
CO alarm life span
alarms have a life expectancy of around seven years. All CO alarms produced
after August 1, 2009, have an end-of-life warning notification that alerts the
resident that the alarm should be replaced. The CO alarm will beep every 30
seconds or display ERR or END.
a CO alarm is at its end-of-life, replacing the battery will not stop the beep.
Some CO alarms have a feature that will silence the signal for 30 days, but
this will not solve the issue as the CO alarm will continue to beep after the
30 day period ends.
What people should know
Homeowners should consider replacing all CO alarms that were installed in or before 2013. A CO alarm that signals that it’s at the end of its life should be replaced as well.
Renters should notify property managers or landlords immediately if their CO alarm is beeping every 30 seconds indicating its end-of-life. They should also know that intermittent beeping CO alarm is not reason to call 9-1-1.
A CO alarm that beeps continuously without stopping could indicate that carbon monoxide is present. If you your CO alarm is sounding continuously and you have signs of CO poisoning such as dizziness, headache, vomiting or flu like symptoms, find fresh air and call 9-1-1 immediately.
More information on carbon monoxide alarm requirements
January of 2013, Washington State law (RCW 19.27.530) required CO alarms to be
installed in new residences and in existing rental properties.
residences, legally occupied before July 26, 2009, are not required to have CO
alarms until they are sold or when a building permit application for interior
remodeling is submitted.
Seattle Fire Department’s CAM 5121 Carbon Monoxide Alarm Requirements in Residential Occupancies