Owning a motorcycle grants independent, open-road travel not found in a typical automobile. Whether you have a traditional cruiser or sport bike, there are some conventional measures every motorcycle owner must keep in mind. One of these is maintenance. Use this guide on motorcycle repair tips for first-time owners to ensure safe, comfortable, smooth rides wherever you go.
Check the Tires
As with any vehicle, one of the most important steps to maintaining your motorcycle is to check its tires. Since motorcycles typically only have a front and rear tire, the inspection process is easy. Tires should remain in good condition, but if they’re cracked, cut, or low on tread, they may need replacements. Additionally, maintain stable tire pressure. Street motorcycle tires usually sit between 28 to 40 psi but check your owner’s manual for specific numbers.
Next, monitor the control gauge. Brake lever, pedals, clutch, throttle, and grips all impact the safety and handling of your ride. If any of these controls feel loose, disconnected, or misaligned, adjust them accordingly. You may need to take your bike to a licensed motorcycle mechanic if you feel these adjustments are too complex for your skillset. Check the brake pads and braking fluid, too, to keep these consistent.
Though some owners might not think of touchup paint as an important motorcycle repair tip for first-time owners, touchup paint helps remove small scratches and dents on the bike’s exterior. The process is simple. Simply find the make, year, and model of the bike, select its respective color, then choose the appropriate applicator. From there, select a repair kit that includes sandpaper, the basecoat, and a finishing clearcoat primer to give your motorcycle a shiny, clean finish.
Finally, refill any fluids. While motorcycles use similar fluids as automobiles, there are also a few specific fluids to keep in mind. Engine oil, coolant, brake fluid, and transmission fluid keep the engine, heating and cooling, and transmission functioning properly, but keep in mind fork oil and hydraulic fluid. Fork oil lubricates the tubes in the front fork of the motorcycle, while hydraulic oil lubricates the suspension. Each of these fluids ensures a safe, smooth ride.